1661 Botelho Drive, Ste 180 Walnut Creek, CA 94596 Open Tuesday - Saturday 9-5 Questions? 925-937-7575
Janome 1110DX Serger
(In Store Only Machine ~ Please call for more info)
The 1110DX makes serger sewing easy! Incorporating the differential feed system of two feed dogs, puckered edges on woven fabrics and stretched edges on knits are virtually eliminated. The rolled hem conversion feature eliminates the need to change the needle plate, foot, or tension setting for rolled hemming. Restructured lower looper guides allow easy access. The included threading card and color-coded guides are easy to follow for 2, 3, or 4 thread serging.
2 and 3 / 4 thread overlock Regular type needle 1 – 5mm seam length 3.5mm (regular); 5.7mm (wide); 2.0mm (narrow) seam width 0.5 – 2.25 differential feed ratio Front and back needle guard Color coded thread guides Snap-on presser feet Electronic speed control Easy to follow upper thread guide Dual feed dogs and differential feed Adjustable cutting width Easily retractable upper knife Easy to reach lower looper guides Quick change rolled hem Solid metal base plate
Skeleton Body Construction Lay-in Tension Dial 2, 3 and 4 Thread Convertible Maximum Speed: 1,300 spm Incorporated Tension Release Device Incorporated Rolled Hem Changed Over Device Adjustable Foot Pressure (Adjusting Screw) Snap-on Presser Foot Feed Adjustment: Dial on Belt Cover (with Window) Differential Feed Adjustment: Dial on Belt Cover (with Window) Dial Cutting Width Adjustment Alined Spool Pin Spool Stand Carrying Handle: Part of Machine Body Thread Cutter (Underneath the Face Plate) Length of Feet: 1 to 5 mm Differential Feed Ratio: 0.5 to 2.25 Cutting Width: 3.1 – 7.3 mm Waste Chip Box Accessory Box Foot Controller