Questions? 925-937-7575 | dan@sewingmachineshop.com
1661 Botelho Drive, Ste 180
Walnut Creek, CA 94596
Open Tuesday - Saturday 9-5
Questions? 925-937-7575
JANOME MEMORY CRAFT 8200QCP
We are sewing machine professionals, not just another internet retailer. Please call 1-800-300-4739 about current promotions, interest free financing, and our low price promise on this model and all machines we sell.
Available by order only. Please call ahead to purchase.
Extra sewing room - With all of your essential features! The Horizon Memory Craft 8200QCP offers creativity and control right out of the box.
KEY FEATURES
Darning Foot
Sometimes referred to as the embroidery foot, the darning foot is used for "free hand" embroidery and darning to ensure proper stitch formation, minimize skipped stitches and puckering and also protect your fingers while you move your fabric freely under the needle. Especially beneficial to those just learning how to do free hand embroidery. The open toe version greatly improves visibility of stitches and is especially popular with quilters.
Rolled Hem Foot
Zipper Foot
This foot can be set to sew on each side of the zipper by adjusting the position of the foot and tightening the thumb screw. Also great for sewing close to piping.
Dual Feed Foot
The Dual Feed Foot for AcuFeed comes standard with all models with the AcuFeed System. The foot is specially designed to engage the AcuFeed system, and move the top layer of fabric in sync with the bottom layer.
Button Sewing Foot
Quick and easy button sewing with the special button sewing foot. This foot has two bars that attach to the foot shank to provide extra stability and also has a textured, rubber sleeve to hold the button secrely in place while sewing.
Free Motion Quilting Feet
This set includes three different feet that attach to the holder with a screw for maximum sturdiness and safety. Feet included in the package are: Closed Toe Foot for general use with lace and catchable fabrics, Open Toe Foot for general use and extra visibility, and a Clear View Foot for uneven surfaces and evenly spaced quilting.
Open Toe Satin Stitch Foot
The open toe on this foot allows a better view of the sewing in progress. This foot can be used for quilting, monogramming, applique and cutwork. This foot can also be referred to as a Custom Crafted Zig-Zag Foot.
Satin Stitch Foot
For sewing dense zigzag stitching. The bottom of the foot is beveled for smooth delivery of thread when sewing decorative or sating stitches. Foot is made of clear plastic making it easier to view stitching.
Automatic Buttonhole Foot
For sewing buttonholes on tight areas such as cuffs and other areas where more freedom of movement is required than available with a sliding-type buttonhole foot.
Overedge Foot
Use with an overcasting stitch to allow thread to wrap around the edge of the fabric to prevent unraveling. The foot guides the fabric and keeps your edges flat by compensating for the lack of friction when the needle makes the right-most stitch. Particularly good for finishing off medium to heavyweight, easily frayed woven fabrics such as tweed, gabardine, and linen.
Straight Stitch Needle Plate
Used for Straight Stitching in the center position. The Straight stitch plate helps provide a more stable base. The smaller opening is great for working on fine fabrics that are prone to getting pulled into the feed dogs.
Extra sewing room - With all of your essential features! The Horizon Memory Craft 8200QCP offers creativity and control right out of the box.
KEY FEATURES
- Top loading full rotary hook bobbin system
- 170 built in stitches up to 9mm wide, including 3 alphabets
- 10 one-step buttonholes
- Detachable AcuFeed Flex system
- Auto tension system
- Built-in, one-hand needle threader
- Snap-on presser feet
- Memorized needle up/down
- 7-piece feed dog
- One-step needle plate conversion
- 1,000 spm sewing speed
- Super fine needle position adjustment
- Start/Stop button
- Speed control slider
- Locking stitch button
- Automatic thread cutter
- Twin needle guard
- Easy reverse button
- Advanced Plate Markings
- Individual and combination stitch editing
- Adjustable knee lift
- Auto-declutch bobbin winder
- Extra high presser foot lift
- High resolution LCD touchscreen
- Foot pressure adjustment
- Maximum stitch width: 9mm
- Maximum stitch length: 5mm
- Pattern stitch length calculator
- 5 ultrabright LED lamps for shadow-free sewing
- Double accessory bins plus upper storage
- 11" to the right of the needle
- Easy set bobbin and bobbin winder
- Straight stitch needle plate with right needle position for 1/4" seam foot
- Tactile jog dial
- Special spool holder for long spools
- Buttonhole with stabilizer plate for thick fabric
| A popular foot with patch workers for that essential 1/4 inch seam. The guide on the foot enables you to sew a perfect 1/4 inch seam every time. The guide can also be used wherever a 1/4 inch seam is called for but the markings on the needle plate cannot be used, such as when completing a flat seam. |
Blind hemming can sometimes be a little bit tricky so the blind hem foot goes some way to helping improve this technique. The foot has a metal guide in the center and three grooves on the underside. During blind hemming, the fold of the fabric fits snugly against the guide in the foot for accuracy while the groove underneath help to prevent unnecessary slipping. The needle swings over the metal guide creating slack in the upper tension so that the pick of the stitch is almost invisible. |
 |
 |
Darning Foot
Sometimes referred to as the embroidery foot, the darning foot is used for "free hand" embroidery and darning to ensure proper stitch formation, minimize skipped stitches and puckering and also protect your fingers while you move your fabric freely under the needle. Especially beneficial to those just learning how to do free hand embroidery. The open toe version greatly improves visibility of stitches and is especially popular with quilters.
Rolled Hem Foot
Zipper Foot
This foot can be set to sew on each side of the zipper by adjusting the position of the foot and tightening the thumb screw. Also great for sewing close to piping.
Dual Feed Foot
The Dual Feed Foot for AcuFeed comes standard with all models with the AcuFeed System. The foot is specially designed to engage the AcuFeed system, and move the top layer of fabric in sync with the bottom layer.
Button Sewing Foot
Quick and easy button sewing with the special button sewing foot. This foot has two bars that attach to the foot shank to provide extra stability and also has a textured, rubber sleeve to hold the button secrely in place while sewing.
Free Motion Quilting Feet
This set includes three different feet that attach to the holder with a screw for maximum sturdiness and safety. Feet included in the package are: Closed Toe Foot for general use with lace and catchable fabrics, Open Toe Foot for general use and extra visibility, and a Clear View Foot for uneven surfaces and evenly spaced quilting.
Open Toe Satin Stitch Foot
The open toe on this foot allows a better view of the sewing in progress. This foot can be used for quilting, monogramming, applique and cutwork. This foot can also be referred to as a Custom Crafted Zig-Zag Foot.
Satin Stitch Foot
For sewing dense zigzag stitching. The bottom of the foot is beveled for smooth delivery of thread when sewing decorative or sating stitches. Foot is made of clear plastic making it easier to view stitching.
Automatic Buttonhole Foot
For sewing buttonholes on tight areas such as cuffs and other areas where more freedom of movement is required than available with a sliding-type buttonhole foot.
Overedge Foot
Use with an overcasting stitch to allow thread to wrap around the edge of the fabric to prevent unraveling. The foot guides the fabric and keeps your edges flat by compensating for the lack of friction when the needle makes the right-most stitch. Particularly good for finishing off medium to heavyweight, easily frayed woven fabrics such as tweed, gabardine, and linen.
Straight Stitch Needle Plate
Used for Straight Stitching in the center position. The Straight stitch plate helps provide a more stable base. The smaller opening is great for working on fine fabrics that are prone to getting pulled into the feed dogs.
Find Us
Contact Us
- Phone: (925) 937-7575
- dan@sewingmachineshop.com
- Shop Hours:
Tuesday to Saturday - 9 am - 5 pm
Monday & Sunday: Closed
